• TH511 PCE mother liquor
  • TH511 PCE mother liquor
  • TH511 PCE mother liquor
  • TH511 PCE mother liquor
  • TH511 PCE mother liquor

TH511 Ultra water reduction polycarboxylate superplasticizer

  • Packaging:1000 litre tank
  • Min. Order Quantity:1 tonne
  • Supply Ability:100000 tonnes per Year
  • Payment Term:L/C at sight or T/T with 30% deposit
Share With:
  
  • Overview
  • Technical Data
  • Inquiry
TH511 is polycarboxylate ether-based superplasticizer (PCE). It is developed for applications in the ready mixed concretes. Its addition to concrete or mortar allows the huge reduction of the water to cement ratio, drastically improves the workability and performance of the mixture, and enables the production of self-consolidating concrete and high performance concrete.
The normal dosage of TH511 is between 0.2% and 0.6% by cement (cementitious material) weight. Dosages outside this range are permissible subject to trial mixes.
Since dosage affects the performance a lot, so please add our product using precise metering device. The maximum effect is achieved when diluted into concentration 10%-20%.
Our PCE of TH511 are good for and widely used in high-speed roads, high-speed railways, bridges, power stations, tunnels, dams, runways and buildings etc.

Advantages of our company
1. TOP 10 PCE manufacturer in China
2. Annual production capacity is 100000 tonnes.
3. Our products are certified by Ministry of China Railways for China high-speed railway projects.


Why choose our polycarboxylate superplasticizers?
Polycarboxylate superplasticizers
the most wonderful water reducing admixture up to now
Advantages
(compared with other superplasticizer)
1. To maintain slump perfectly within 1-3 hours
2. Low dosage, and so to save cost in comparison with other superplasticizer at equal performance
3. High water reduction
4. To enable a much better flowability of the mixture
5. To improve the strength and durability of the concrete drastically
6. To save cement at equal strength and durability
7. Eco-friendly (no formaldehyde or benzene)
8. Resulting in low concrete shrinkage ratio to make sure better construction quality
 
  Disadvantages
(compared with polycarboxylate superplasticizers)
Naphthalene superplasticizer 1. Big slump loss
2. Hard to avoid segregation when dosage is slightly higher
3. Certain pollution to the environment as formaldehyde or benzene content
Melamine superplasticizer 1. Air entraining performance is bad
2. Using cost is comparatively high
3. No highlight in its features
Lignosulfonate superplasticizer 1. Low water reduction
2. The performance is common
3. It’s from 1930s, and is coming to be eliminated products. Still used today only for being eco-friendly and people’s habit
4. Using cost is comparatively high






Polycarboxylate Superplasticizer Concrete Technical Data
Items Standard Test results
Water reduction

≥25%

34%
Air content

≤2.0%

1.1%
Compressive strength ratio 1d

≥170%

218%
3d

≥160%

203%
7d

≥150%

199%
28d

≥140%

184%
Slump Initial slump

/

230mm
Slump after 1h

/

225mm
* The above results are based on our product XH-S20, solid content 20%, tested according to standard TB/T3275-2011.

Polycarboxylate Superplasticizer Technical Data
Items Test results
Appearance Light white or Colorless liquid
Solid content 50%
PH 6
Specific Gravity 1.10±0.02
Total alkali content

≤2.0%

Chloride content (Cl-)

≤0.10%  Chloride-free

*The above results are based on our PCE (mother liquor), tested according to standard GB8076-2008.
Please feel free to send your inquiry in the form below.